10t/d wood charcoal production line can produce 3,000 tons of charcoal mechanism called automated production lines, investment environment-friendly 10t/d (3,000 tons) charcoal automated production line feasibility analysis is as follows:
First, investment in environmental protection mechanisms charcoal automated production lines is feasible and safe.
1, charcoal as a waste of renewable energy fuels, higher than the average calorific value of coal, smokeless, odorless, non-toxic, clean, wide range of uses; in industry, agriculture, animal husbandry and civilian industries in great demand. The use of charcoal in the industry amounted to hundreds of the industry, it is the first major industry of charcoal demand.
2, China as a large agricultural country, resulting in hundreds of million tons per year, "less useful" but it must be disposed of agricultural and forestry "waste"; Southeast Asian countries, a large number of palm shell, coconut shell, husk has long been abandoned; currently many European the cost of coal countries, including Britain, the Netherlands and Italy, and rising urgent mitigation; every year a large number of Japan, America, Korea, Southeast Asia and Taiwan and other countries and regions, our suppliers to find charcoal resources and our existing charcoal production capacity cannot meet existing market demand.
3, in the traditional manner charring waste resources into economic advantages, there have been serious problems of environmental pollution, according to experts, research, old-fashioned charcoal kilns, furnaces traditional mechanisms charring way to become the new source of environmental pollution, when many manufacturers carbonized charcoal It generated a lot of thick smoke, not only become the bottleneck problem of environmental protection, and even bring disaster to the city to become the culprit haze weather has attracted national attention. For the protection of the living environment, meet the national environmental requirements, the zhengzhou xinminghe company smoke-free, green, energy-efficient equipment for the carbonized charcoal industry, which is the ideal equipment and old kiln carbonization furnace replacement, environmental protection charcoal technology the development and application of effective national policies conform, environmental protection mechanisms charcoal production line increasing attention. The new name Wo environmental protection carbonization equipment, flue gas generated during carbonization of using its own combustion gas becomes available, zero pollution, zero smoke emission; advanced equipment and technology, convenient operation, saving the provincial labor, the whole production line that is 1-2 people operatively; there are several specifications, according to production requirements, rational allocation; charring furnace regardless of size, each furnace carbonization time were only 4-5 hours, charring short time speed; a high rate of carbon and intact, the article attributed to high temperature carbon; the entire production process without loss of raw materials, the gasified ignition material into charcoal, or can be sold directly into the carbon rod. Energy saving, environmental protection, high efficiency, suitable for large-scale production.
4, with the continuous increase in labor costs, manufacturers of charcoal mechanism charcoal production line automation degree requirements are also getting higher and higher, investment charcoal automated production lines, is an investment, the annual benefit. Zhengzhou Xinminghe Mechanical Equipment CO., Ltd on the basis of absorbing foreign advanced technology on the charcoal equipment, innovation and improvement through the development and production of charcoal automated production lines, advanced technology, labor-saving, high efficiency, low production costs, product quality, environmental protection and energy saving. The entire device can link through reasonable proportion of the pulverized material, screening and drying, charring stick to automated production, greatly reduce labor costs and increase investment yields. For the above situation, the use of agricultural and forestry waste (garbage agricultural and forest products) as raw materials, use of environmentally friendly charcoal processing technology to make it into the new energy --- green charcoal, turning waste into treasure, riches, the ideal project benefits the country investment environment-friendly charcoal automated production line is a huge enrichment industry is safe and feasible. Second, environmentally friendly produce 3,000 tons of charcoal mechanism for automatic production line
1-1 using a blade grinder grinding raw materials reached rods size requirements;
1-2 selected drum dryer drying sawdust, reaching rods moisture requirements;
1-3 Configuring the new system of rods machine 6sets to meet the required 10 tons of finished stipends;
1-4 choice of automatic loading and unloading, automatic cut rods, transportation stipends, save manpower and improve efficiency;
1-5 Configuration 2 large non-smoking charring furnace, meet Nissan 10 tons of charcoal production requirements;
As the 1t/h wood charcoal production line, please check the equipment list
|
No |
Name |
Model |
Qty（set） |
Power (kw) |
|
1 |
Wood crusher |
RGW400 |
1 |
15 |
|
2 |
Belt conveyor |
B500×8 |
1 |
3.0 |
|
3 |
Wood hammer mill |
RGC600 |
1 |
22 |
|
4 |
Belt conveyor |
B500×8 |
1 |
3.0 |
|
5 |
Rotary dryer |
Φ1.2×12 |
1 |
11 |
|
6 |
Belt conveyor |
B500×8 |
1 |
3.0 |
|
7 |
Bucket elevator |
HL250×12 |
1 |
3.0 |
|
8 |
Silo |
RGS-Φ1.5×4 |
1 |
4.0 |
|
9 |
Screw conveyor |
RGSC219×5 |
1 |
3 |
|
10 |
Wood charcoal machine |
MT-50 |
2 |
44 |
|
11 |
Carbonization furnace |
RSCS-3 |
2 |
5.5 |
|
12 |
Packing machine |
RGZ-100 |
1 |
2.2 |
