Continuous environmental charcoal production line is suitable for sawdust, rice husks, bamboo shavings, sawdust, shell, palm shell, coconut shell, Stick Straw (after crushing) and other granular materials carbonization, charring greater need to put raw materials pulverized into particles less than 30mm, it is the industry's most advanced processing charcoal carbonized equipment, the entire process does not produce harmful gases, do not pollute the environment. With high efficiency, environmental protection, energy saving three major advantages, the following analytical breakdown of how the Zhengzhou Xinminghe Mechanical Equipment Co., Ltd environmental continuous charcoal production line is to achieve three major advantages:
1, how to achieve environmental protection?
By varying flue gas recycling device optional flue gas treatment system, the flue gas after the spraying, cooling, purification process, clean conversion to combustible gas as a heat source for carbonization itself, recycling, the whole production process, non-smoking gas emissions and meet the national environmental protection requirements.
2, how to achieve efficient?
Charring using drying machine, 24-hour continuous production
Continuous environmental charcoal production line works:
First, the good matching of biomass fuel into the gasified ignition, after spraying, cooling, flue gas purification process, and transformed into a combustible gas (carbon monoxide, methane, ethane, etc.), as a preliminary charring drying heat source within the production line to host charred material (such as coconut shell particles, bamboo shavings, rice husk, sawdust, straw powder, shell, palm shell, Stick powder) is heated drying carbonization. Isochronous production charring smoke, the smoke produced full recovery, then by spraying, cooling, purification process, combustible gases generated by the combustion cycle, the production line into the upper side of the material, while the continuity of the production status of the finished product , then gasifier gasification stop work, the production process of carbonization temperature can be adjusted up to a maximum temperature of 600-900 ℃.
It can be seen that the efficiency of its work according to the principle:
1, no loss of fuel gasifier gasification, carbon black has become, like saying gasifier gasification process is a process of charcoal production;
2, Zhengzhou Xinminghe Mechanical Equipment Co., Ltd environmental continuous charcoal production line using automatic feeding, automatic carbon, automatic control, save manpower and improve efficiency;
3, the new production line for Zhengzhou Xinminghe Mechanical Equipment Co., Ltd  toner charring and drying machine, unique design without drying materials, drying materials automatically, and automatically discharge the water, greatly improving the efficiency of the carbonation, in terms of quality and efficiency of the carbonation, meet the needs of different customers, we have been recognized;
4, the entire production line 24 hours of continuous production, while feed, while the charcoal, carbonized speed, single-row equipment production line output up to about 500kg / h, the device is about double the yield up to 1000kg / h, according to different raw materials, yield difference, for higher yields, can increase the diameter of the pipe;
5, easily obtained raw materials and low cost, a variety of waste biomass feedstock can be carbonized.
As the 1t/h charcoal powder production line,  please check the equipment list

No	Name	Model	Qty（set）	Power (kw)
1	Wood crusher	RGW600	1	30
2	Belt conveyor	B500×8	1	3.0
3	Wood hammer mill	RGC1000	1	45
4	Screw conveyor	Φ256×6	1	2.2
5	Continuous carbonization furnace	RGS-7	1	24
6	Flue gas filtration equipment	Standard	1	0
7	Dust collection system	Φ1.5×15	1	5.5
8	Molding machine	B500×8	1	11
9	Packing machine	RGC1000	1	2.2